Rabu, 14 Februari 2018

HISENSE U601S Format Solution With CM2 Dongle

HISENSE U601S Format Solution With CM2 Dongle

Operation : Check/Read Info [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

Wait for phone...

Phone found! [ 96 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0 
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info ... 

Model Name : U601S
Model Brand : Hisense
Model Device: HS7731CSP
AndrVersion : 6.0
BaseBand CPU: SP7731CEA_FS071
CompileDate : 10/27/2016 3:09:18 PM
Project Ver : Hisense_U601S_S05_20161027
Model Ext : Hisense U601S

ExtraInfo : HWInfo not exists, normal phone

Elapsed: 00:00:21

Reconnect Power/Cable!


Operation : Read FullFlash [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 96 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0 
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ... 

Phone found! [ 96 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0 
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ... 

Phone found! [ 96 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0 
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name : U601S
Model Brand : Hisense
Model Device: HS7731CSP
AndrVersion : 6.0
BaseBand CPU: SP7731CEA_FS071
Project Ver : Hisense_U601S_S05_20161027
Model Ext : Hisense U601S

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ... 

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : fbootlogo3.bin
[Read Ok] : fbootlogo4.bin
[Read Ok] : fbootlogo5.bin
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2432 MiB
Saved to : H:\flash firmware\infinity\SP7731CEA_FS071_HS7731CSP_6.0_Hi sense_U601S_S05_20161027_Hisense_U601S\
Done!

Elapsed: 00:09:45

Reconnect Power/Cable!


Operation : Format File System / Reset Settings [ v1.24 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 96 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0 
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ... 
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size : 0x0000000129EF7000
State : 0x0001

Mount : /cache
Size : 0x0000000009600000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Android 5.x : Reset FRP Lock
Reset Ok!


Done!

Elapsed: 00:00:21

Reconnect Power/Cable!

Tidak ada komentar:

Posting Komentar