Tampilkan postingan dengan label Infinity best Dongle. Tampilkan semua postingan
Tampilkan postingan dengan label Infinity best Dongle. Tampilkan semua postingan

Rabu, 14 Februari 2018

Nokia E6 Format Solution With Infinity Best Dongle

Nokia E6Nokia E6 Format Solution With Infinity Best Dongle

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info...  - Ok

Reading Phone Info....
Connected phone -    Nokia E6-00
Software ver : V 92_11w25.1 01-07-11 RM-609 (c) Nokia
IMEI    :      354875040631878
XappVer :      000008CA
Ape Ver :      022.014
APE Var :      022.014022.014.33.01022.014.C02.01
APE ADSP:      256
DSP Ver :      92_11w25
APE Test:      rm609_ENO_v_0.0295
PPM     :      
CNT     :      
Product SN   :     CDK446241
Product code :     059F1S7
Base Prd.code:     0587929
Module code  :     0204420
Long Prod.SN :     0
Hardware info
HWID  : 7000
Retu  : 40
Tahvo : 00
Battery: 3902 mV
APE BT: HCI Version 20 (rev. 64). LMP Version 44 (rev. 64). Manufacturer 2016.
APE HW: 256
Lock info
IMEI       : 354875040631878
IMEI spNet : 3A 45 78 05 04 36 81 07 
IMEI svNet : 33 45 78 05 04 36 81 07 F6 

Conf key     : 0000000000000000
Provider key : 2440700000000000
Country      : Finland
Operator     : NOKIA (Open)
Counters     : Key 0  [3] , Fbus 0  [10]
Blocks       : 7

LOCK STATUS :
=============================
BLK : 1
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS :  All Open
=============================
Error collect lock info, try again
CRT308 Backup Created

SDD key status : Ok
CMLA Key status : Ok
SimLock status : Ok
Security status : Ok
PA_SimLock Version : 
Infinity Best Dongle
PA_SL3 phone ,  SP_CODE_LEN : 15

User code : Crypted
UserDataExLevel : Low [Gallery] , FullFlash method 

Done!

Resetting selected items...
Check phone mode...
Phone in RfInactive mode
Seting Test mode... wait...
Test mode set
Settings Full Factory Defaults...
Set OK!
Settings Software Upgrade Defaults...
Set OK!
Settings Service Centre Defaults...
Set OK!
Settings Production Tune Defaults...
Set OK!
Settings User Data Defaults...
Set OK!
Settings Leave Factory defaults...
Set OK!

Elapsed: 00:00:17

Set phone in Normal mode...
Restarting...
Done!

Phone disconected!

Connect phone on selected interface...

Kamis, 01 Februari 2018

Asha 200 Flashing Solution With Infinity Best Dongle

Asha 200 Flashing Solution With Infinity Best Dongle

Core : v2.25 , BB5XG FlashEngine : v10.3
Asha 200
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm761__11.95.mcusw
PPM : rm761__11.95.ppm_ma4
CNT : rm761__11.95.image_ma4_059J4L1
Flashing phone now...
[Gen] Rules accepted for : XGOLD Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" / Operation not start
-> Or if Phone start charge - just reinsert battery
-> If flashing freeze - reinsert cable/battery and try again
--- Press phone's power button or insert usb cable! ---

Connection opened successfully

IF Boot Init : 0xF0
IF Resp Len  : 0x0A
IF xCPUID    : XGOLD 213 [XMM2130 QUANTUM]
IF Resp Data  :  1FB300020303010100FF

Sending EBL Loader ... 
EBL Loader Ok, 01
EBL Loader ready, AA
Sending EBL ... 
EBL sent Ok
EBL : Quantum_Bootloader_10.46_M1S1
Speed accepted, use 6.500.000
FLASHID : 89008289
FLIC conf set, RST set
Boot done!

Check keys...
Check done. Image can be flashed

Backup enabled, will read all certificates

Reading CCC
Reading HWC
Reading NPC

IMEI 1 : 354638059780444
IMEI 2 : 354638059780451
PCcode : 059N797

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : F:\1+Flashing Software\1+Infinity Box\BEST\Backup\Cert\354638059780444_2nd_XG213_CRT.rpl

Settings : EDM [0x8] , Block Mode , Fast CRC , Verify

   ===Flashing [MCU]===
File : rm761__11.95.mcusw
Image : rm761__11.95.mcusw_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ... 
Erase done, time : 00:00:00 
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
Erasing, wait ... 
Erase done, time : 00:00:00 
Write , Start : 0x40040000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40060000 , Len : 0x00100000
Erasing, wait ... 
Erase done, time : 00:00:05 
Write , Start : 0x40060000 , Len : 0x00100000
Flashing , wait ...
Infinity Best Dongle
Region flash done, time : 00:00:01
Processing Region 4/5
Erase , Start : 0x40280000 , Len : 0x01800000
Erasing, wait ... 
Erase done, time : 00:01:54 
Write , Start : 0x40280000 , Len : 0x01800000
Flashing , wait ...
Region flash done, time : 00:00:34
Processing Region 5/5
Erase , Start : 0x43E20000 , Len : 0x00040000
Erasing, wait ... 
Erase done, time : 00:00:00 
No write data, skip
CRC check passed , 0x495E

   ===Flashing [PPM]===
File : rm761__11.95.ppm_ma4
Image : package_ma4.ppm_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41A80000 , Len : 0x00740000
Erasing, wait ... 
Erase done, time : 00:00:26 
Write , Start : 0x41A80000 , Len : 0x0051B9BC
Flashing , wait ...
Region flash done, time : 00:00:06
CRC check passed , 0xE3CE

   ===Flashing [CNT]===
File : rm761__11.95.image_ma4_059J4L1
Image : package_ma4_059J4L1.image.fls
Sec-pack found, sending ...
Sec-pack sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x421C0000 , Len : 0x01C60000
Erasing, wait ... 
Erase done, time : 00:04:32 
Write , Start : 0x421C0000 , Len : 0x00B00000
Flashing , wait ...
Region flash done, time : 00:00:18
Processing Region 2/2
Erase , Start : 0x43E60000 , Len : 0x000E0000
Erasing, wait ... 
Erase done, time : 00:00:08 
No write data, skip
CRC check passed , 0xBE05

Flashing done!
Total flash time : 00:08:10
Reboot phone now...

Reading Phone Info....
Connected phone -   Nokia 200
Software Info:     V 11.95 19-12-12 RM-761 (c) Nokia            
IMEI:  354638059780444
PPM version :   V 11.95 19-12-12 RM-761 (c) Nokia             MA4
Product code:  059N797
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Check and Upload User Certificates ...
Total - 43 certs
Certificates found, skip upload ...
Battery voltage is enough for start
AfterFlash operations done ;D
Done!
Connect phone on selected interface...


Elapsed: 00:09:05
Connect phone on selected interface...