Rabu, 28 Februari 2018

Micromax a104 flashing Solution With CM2 Dongle

Micromax a104Micromax a104 flashing Solution With CM2 Dongle

Operation : Check / Read Info [ v1.56 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 47 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473164040501A1A8699135
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164040501A1A8699135
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0xC1F94A5C4FD80089C4E9162F9BF0162E
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : Micromax
ProdName  : A104
ProdModel : Micromax A104
Device    : A104
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : MMX_A104_SW_V8.1.0_HW_V1.0_20140929

SECURITY : 
IMEI_SW [1] : 91144020005----
IMEI_SW [2] : 91144020021----
BTMAC Addr  : 3ABAC86582BF
WiFi MAC    : 902181391F85

Done!
Elapsed: 00:00:10
Reconnect Power/Cable!


Operation : HW Test [ v1.56 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 47 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473164040501A1A8699135
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164040501A1A8699135
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0xC1F94A5C4FD80089C4E9162F9BF0162E
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
CM2 Dongle


[Processing] FlashMemory Read-Write test
[eMMC] : [HYNIX] , d1G4 , 0xE9000000 , 3728 MiB
[eMMC] : CID : 90014A4834473164040501A1A8699135

[eMMC] : MODE : SQ-WR
[PASSED] : eMMC RW Check #1 Ok!
[eMMC] : MODE : RA-WR
[PASSED] : eMMC RW Check #2 Ok!

[eMMC RO CHECK] : eMMC Ok! READ-WRITE Passed!

All Done!

Done!
Elapsed: 00:00:47
Reconnect Power/Cable!


Scatter Load Ok , BaseBand : MT6582 , Project : huaqin82_cwet_kk , Storage : EMMC
Files found : 12 , Set to Flash : 11
Ready to Flash!

Operation : Flash [ v1.56 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 47 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473164040501A1A8699135
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164040501A1A8699135
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0xC1F94A5C4FD80089C4E9162F9BF0162E
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6582 , Project : huaqin82_cwet_kk , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify :  Disabled
Setting : HW verify :  Enabled

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC supported by BootLoader!

BL : BatteryLevel : 3675 mV
BL : BatteryLevel Ok

BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000000C00000-0x0000000000100000
Erase : 0x0000000002900000-0x0000000083680000
Flash Pre-Erase Done, time used : 00:00:03

SecCfg Passed , 1799
BMT remark not need. Will skip
Sending Preloader ... 
Use : preloader_huaqin82_cwet_kk.bin
Preloader Sent , Init passed
SecCfg Passed , 1799
PartCount : 0014
Update PMT by user request
Repartition Done!
Use FLN Mode

Processing : Flash Write
Flash now : MBR
Image Flash Ok
Flash now : EBR1
Image Flash Ok
Flash now : UBOOT
Image Flash Ok
Flash now : BOOTIMG
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : SEC_RO
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : EBR2
Image Flash Ok
Flash now : ANDROID
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USRDATA
Image Flash Ok
Flash now : FAT
Write Error , code 0x000! Something went wrong!

Operation Failed
Elapsed: 00:04:14
Reconnect Power/Cable!

karbonn s5 Plus flashing Solution With CM2 Dongle

karbonn s5 Plus flashing Solution With CM2 Dongle

Operation : Check / Read Info [ v1.56 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 66 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004B3557564D42019E60CE03116B
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMVW5
[eMMC] : FLASH_CID : 1501004B3557564D42019E60CE03116B
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0xC1F94A5C82940BE1C600B105D14BB288
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : Coolpad
ProdName  : Karbonn
ProdModel : Karbonn Titanium S5 Plus
Device    : Karbonn
AndroidVer: 4.2.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.JB5.MP.V1.10

SECURITY : 
IMEI_SW [1] : 91130935616----
IMEI_SW [2] : 91130935632----
BTMAC Addr  : 18DC567A1FBB
WiFi MAC    : 18DC56781FBB

MODEM : 
BaseBand  : MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V15_P1_1_wg_n

Done!
Elapsed: 00:00:12
Reconnect Power/Cable!


Operation : HW Test [ v1.56 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 66 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004B3557564D42019E60CE03116B
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMVW5
[eMMC] : FLASH_CID : 1501004B3557564D42019E60CE03116B
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0xC1F94A5C82940BE1C600B105D14BB288
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


[Processing] FlashMemory Read-Write test
[eMMC] : [SAMSUNG] , BMVW5 , 0xE9000000 , 3728 MiB
[eMMC] : CID : 1501004B3557564D42019E60CE03116B

[eMMC] : MODE : SQ-WR
[PASSED] : eMMC RW Check #1 Ok!
[eMMC] : MODE : RA-WR
[PASSED] : eMMC RW Check #2 Ok!

[eMMC RO CHECK] : eMMC Ok! READ-WRITE Passed!

All Done!

Done!
Elapsed: 00:00:46
Reconnect Power/Cable!


Scatter Load Ok , BaseBand : MT6582 , Project : yulong82_we_jb5 , Storage : EMMC
Files found : 15 , Set to Flash : 14
Ready to Flash!

Operation : Flash [ v1.56 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 47 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004B3557564D42019E60CE03116B
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMVW5
[eMMC] : FLASH_CID : 1501004B3557564D42019E60CE03116B
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0xC1F94A5C82940BE1C600B105D14BB288
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6582 , Project : yulong82_we_jb5 , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify :  Disabled
Setting : HW verify :  Enabled

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC supported by BootLoader!

BL : BatteryLevel : 3759 mV
BL : BatteryLevel Ok

BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000000600000-0x0000000000100000
Erase : 0x0000000002300000-0x00000000E3E00000
Flash Pre-Erase Done, time used : 00:00:02

SecCfg Passed , 1799
BMT remark not need. Will skip
Sending Preloader ... 
Use : preloader_yulong82_we_jb5.bin
Preloader Sent , Init passed
SecCfg Passed , 1799
PartCount : 0018
Update PMT by user request
Repartition Done!
Use FLN Mode

Processing : Flash Write
Flash now : MBR
Image Flash Ok
Flash now : EBR1
Image Flash Ok
Flash now : UBOOT
Image Flash Ok
Flash now : BOOTIMG
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : SEC_RO
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : EBR2
Image Flash Ok
Flash now : EBR3
Image Flash Ok
Flash now : AUTOBAK
Image Flash Ok
Flash now : ANDROID
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USRDATA
Image Flash Ok
Flash now : FAT
Image Flash Ok
Flash Write Done, time used : 00:04:06


Update Mirror PMT
Update Done!

Update RomInfo done

Done!
Elapsed: 00:04:25
Reconnect Power/Cable!

How to Pattern Unlock Lava iris x8 Solution With CM2 Dongle

How to Pattern Unlock Lava iris x8 Solution With CM2 Dongle

Operation : Read Pattern/DP Lock [ v1.56 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 66 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6592
BB_CPU_NME : [MediaTek] MT6592_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x8A
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4841473265050759E8947732AB
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e2GA
[eMMC] : FLASH_CID : 90014A4841473265050759E8947732AB
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB800000
[eMMC] : FLASH_UCP : 15032 MiB [eMMC 16 GiB]
DEV RID    : 0xC1F94A5C5295E323A7A52023E4CC0AAC
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading data ... 

Get Locks ...
PatternLock Sequnce : 147856

Done!
Elapsed: 00:00:19
Reconnect Power/Cable!


Operation : Check / Read Info [ v1.56 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 66 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6592
BB_CPU_NME : [MediaTek] MT6592_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x8A
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4841473265050759E8947732AB
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e2GA
[eMMC] : FLASH_CID : 90014A4841473265050759E8947732AB
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB800000
[eMMC] : FLASH_UCP : 15032 MiB [eMMC 16 GiB]
DEV RID    : 0xC1F94A5C5295E323A7A52023E4CC0AAC
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : iris
ProdName  : X8
ProdModel : irisX8
Device    : irisX8
AndroidVer: 4.4.2
MTKxCPU   : MT6592
MTKxPRJ   : Lava_irisx8_S018_20150429

SECURITY : 
IMEI_SW [1] : 91143380644----
IMEI_SW [2] : 91143380649----
BTMAC Addr  : 3E5B1D659237
WiFi MAC    : 902181496B88

EXTRA : 
LCD [0] : ili9881_dsi_hd720_txd_aw809
LCD [1] : otm1283_hd720_trust_aw809
LCD [2] : nt35521_hd720_dijin_aw809
LCD Res : 1280x720
TOUCH [0] : ft6436l_aw809
TOUCH [1] : msg2238a_aw809
TOUCH [2] : GT9XX_ZAW809#S7020
TOUCH [3] : #GT9XX
CAM [0] : ov8865_mipi_raw_aw809
CAM [1] : s5k4h5yx_mipi_raw_aw809
CAM [2] : ov8858_mipi_raw_aw809
CAM [3] : ov2680_mipi_raw_aw809
CAM [4] : gc2355_mipi_raw_aw809
MODEM : aw809_zaw809aa_md1_hspa_gemini_g4w1_w2100 #change modem for sim reverse
LOCALE : en_US es_ES zh_CN zh_TW ru_RU pt_BR fr_FR de_DE tr_TR it_IT in_ID ms_MY vi_VN ar_EG th_TH pt_PT nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ iw_IL my_MM km_KH ko_KR hi_IN xhdpi

Done!
Elapsed: 00:00:12
Reconnect Power/Cable!

Micromax q336 flashing Solution With CM2 Dongle

Micromax q336 flashing Solution With CM2 Dongle

Chinese Miracle II  [SPD module] v 1.24

Operation : Check/Read Info [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 Wait for phone...

Phone found! [ 32 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf 
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info ... 

Model Name  : Q336
Model Brand : Micromax
Model Device: Q336
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA
CompileDate : 5/30/2015 12:21:19 PM
Project Ver : MMX_Q336_SW_V8.0.7_HW_V1.0.0_300515
Model Ext   : Micromax Q336

ExtraInfo : HWInfo not exists, normal phone

Elapsed: 00:00:23

Reconnect Power/Cable!


Operation : Read NV [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 32 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf 
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Detected eMMC Flash , Structure detect Ok!

Read GSM NV
Read WCN NV

Read Ok , 0x000296D8
Saved to : U:\spd nv\micromaxx q336 7730 and5.0.spdnv

Elapsed: 00:01:16

Reconnect Power/Cable!


Loading    : sw699_mmx.pac
CRVersion  : BP_R1.0.0
PacCPUinfo : SC77xx
PacVersion : MMX_Q336_SW_V8.0.7_HW_V1.0.0_300515
FastCheck  : 0x00430FB005

Loading files ... 

File : fdl1.bin
File : fdl2.bin
File : nvitem.bin
File : nvitem_wcn.bin
File : u-boot-spl-16k.bin
File : SC7702_sc7731g_band128.bin
File : DSP_DM_G2.bin
File : SC8800G_x30g_wcn_dts_modem.bin
File : boot.img
File : recovery.img
File : system.img
File : userdata.img
File : boot_logo.bmp
File : prodnv.img
File : cache.img
File : u-boot.bin
File : SC7730_UMS.xml

Load Ok!

Operation : Flash [ v1.24 ]

======= Flash
Files set for flashing : 
[ MCU ] : sw699_mmx.pac
CRVersion  : BP_R1.0.0
PacCPUinfo : SC77xx
PacVersion : MMX_Q336_SW_V8.0.7_HW_V1.0.0_300515
File : fdl1.bin
File : fdl2.bin
File : nvitem.bin
CM2 Dongle
File : nvitem_wcn.bin
File : u-boot-spl-16k.bin
File : SC7702_sc7731g_band128.bin
File : DSP_DM_G2.bin
File : SC8800G_x30g_wcn_dts_modem.bin
File : boot.img
File : recovery.img
File : system.img
File : userdata.img
File : boot_logo.bmp
File : prodnv.img
File : cache.img
File : u-boot.bin

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 32 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
PMTManager : Load 0x18 records
PMTManager : PMT Update Ok!
Flashing now

[FlashProc] : ERASE 
Current ID   : ERASEUBOOT
Current Part : uboot
[FlashProc] : Ok!

[FlashProc] : BOOTCODE
Current ID   : SPLLOADER
Current File : u-boot-spl-16k.bin
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : CODE  
Current ID : MODEM_W
Current File : SC7702_sc7731g_band128.bin
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : CODE  
Current ID : DSP_W
Current File : DSP_DM_G2.bin
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : CODE  
Current ID : MODEM_WCN
Current File : SC8800G_x30g_wcn_dts_modem.bin
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : CODE  
Current ID : BOOT
Current File : boot.img
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : CODE  
Current ID : RECOVERY
Current File : recovery.img
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : SYSTEM
Current File : system.img
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : USERDATA
Current File : userdata.img
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : CODE  
Current ID : BOOTLOGO
Current File : boot_logo.bmp
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : ERASE 
Current ID   : FLASH
Current Part : wruntimenv1
[FlashProc] : Ok!

[FlashProc] : ERASE 
Current ID   : FLASH_WCN
Current Part : wcnruntimenv1
[FlashProc] : Ok!

[FlashProc] : CODE  
Current ID : PRODNV
Current File : prodnv.img
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : CACHE
Current File : cache.img
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : ERASE 
Current ID   : ERASEMISC
Current Part : misc
[FlashProc] : Ok!

[FlashProc] : ERASE 
Current ID   : ERASESD
Current Part : internalsd
[FlashProc] : Ok!

[FlashProc] : BOOTCODE
Current ID   : UBOOTLOADER
Current File : u-boot.bin
Flashing now ... 
[FlashProc] : Ok!


Elapsed: 00:09:08

Reconnect Power/Cable!

Uni-Android Tool UAT Version 15.01 Released Setup Download

Uni-Android Tool UAT Version 15.01 Released

Biggest ever All in One Android Tool With Basic to Advance Functions
Present and Next Generation Tool Update 29
What is New ?
Asus
Added Fastboot Adb Enable and FRP reset Support for the Following ASUS Models
Asus ZenFone 2 Laser ZE550KL (Z00LD) Asus ZenFone 2 Laser ZE550KG (Z00W)
Asus ZenFone 2 Laser ZE550KG (Z00WD) Asus ZenPad 8.0 Z380KL (P024)
ASUS ZenPad 10 (Z300M) Asus ZenFone Selfie ZD551KL (Z00UD)
Asus Zenpad Z8s ZT582KL (P00J)
Added Following Support for the Following ASUS Models in EDL Mode
FRP Reset, Format FS, Backup/Restore/Wipe Security, Repair IMEI.
Asus ZenFone 3 Laser ZC551KL (Z01BD) Asus ZenFone 3 Laser ZC551KL (Z01BDA)
Asus ZenFone 3 Laser ZC551KL (Z01BDC) Asus ZenFone 3 Laser ZC551KL (Z01BS)
Asus ZenFone Max ZC550KL (Z010DA) Asus ZenFone Selfie ZD551KL (Z00UDA)
Asus ZenFone Selfie ZD551KL (Z00UDB) Asus ZenFone 3 ZE520KL (Z017DA)
Asus ZenFone 3 ZE520KL (Z017DB) Asus ZenFone 3 ZE552KL (Z012DA)
Asus ZenFone 3 ZE552KL (Z012DB) Asus ZenFone 3 ZE552KL (Z012DC)
Asus ZenFone 3 ZE552KL (Z012DE) Asus ZenFone 3 ZE552KL (Z012S)
Asus Zenfone 4 Selfie Pro ZD552KL Asus Zenfone AR ZS571KL
Lenovo
Added Following Support for the Following Lenovo Models
FRP Reset, Format FS, Wipe/Backup/Restore Security [EDL Mode]
Lenovo Tab 4 TB-X304F Lenovo Tab 4 TB-X304L
Lenovo Tab 4 10 Plus TB-X704L Lenovo Tab 4 10 Plus TB-X704V
Lenovo Tab 4 10 Plus TB-X704F
Added ZTE ZFive2 Z836F with the Following Support
FRP Reset, Format FS, Wipe/Backup/Restore Security, Backup Flash [EDL Mode]
Upload Asus Enginner Roms to Support Area, These roms rooted and enable diag, you can repair imei Asus Qualcomm devices with these roms
More ZTE Unbrick firmwares Uplaoded
WARNING : IMEI Changing is illegal in Most of Countries. IMEI Repair is Intended to Repair IMEI to its Original IMEI Written in Phone Back .
We are not responsible for any Problem caused by mis-using this Function. User will be Sole Responsible for any illegal Activity done by using this Function.
No Box , No Dongle , No Tension of any Hardware Damage or any Driver Installations.
No need of waiting for any Shipping or any Stock availability, Just Download ,get Register and buy Activation.

D o w n l o a d L i n k

UAT_Setup_15.01
Telegram Channel :- https://t.me/UniAndroidTool
-: Official Website :-
Uni-Android Tool - Multi Platform Android Tool
-: Official Support : -
Official Indian Support forum :- Uni-Android Tool Support Forum
Offical Turkey Support Forum :- www.gsmkolik.com
-: Official Resellers :-
Distributors and Resellers Lists

Sigma v.2.27.09. Support for Huawei running Setup Download

Sigma v.2.27.09. Support for Huawei running on Android Oreo

Sigma Software v.2.27.09
Android ADB Tab:
1. Released IMEI repair feature for
♦ Vodafone Smart Speed 6 (VF-795) (MT6735M)
Please use Repair IMEI for MTK Alcatel smartphones with Android 5 / 6 manual to perform this operation.
2. New MTK smartphones in the list:
♦ Bmobile Ax681 (MT6570)
♦ BLU Vivo 5R (MT6753)
HiSilicon Tab:
Added support for Huawei devices running on Android 8
Due to recent server changes:
Use only latest version of Sigma software for servicing of Huawei Phones!

Download Sigma Software v2.27.09

Smart-Clip2 v.1.27.09. Support for Huawei Setup Download

Smart-Clip2 Software v1.27.09

Android ADB Tab:
1. Released IMEI repair feature for
♦ Vodafone Smart Speed 6 (VF-795) (MT6735M)
Please use Repair IMEI for MTK Alcatel smartphones with Android 5 / 6 manual to perform this operation.
2. New MTK smartphones in the list:
♦ Bmobile Ax681 (MT6570)
♦ BLU Vivo 5R (MT6753)
HiSilicon Tab:
Added support for Huawei devices running on Android 8
Due to recent server changes:
Use only latest version of Smart-Clip2 software for servicing of Huawei Phones!

Download Smart-Clip2 Software v1.27.09

Selasa, 27 Februari 2018

Download DirectX 12 For Windows 10

 direct-x-12-for-windows-10
DirectX 12 is provided at the bottom of this post to download free for your computer Windows OS. The free software which allows us to run heavy software and games in our computer system Windows. We are offering you to download this software DirectX 12 for free.

This is the method to run the games which have mostly requirements to install the latest DirectX on your computer Windows operating system. The free software with a lot of work functions to go ahead. It will help you to run the software files/games on your computer without facing difficulties and problems. You are now will be able to run the needed programs and games on your system.

There is the installation guide and the full process by step by step is given at below. Read them to get more information about the software.

  • First of doing anything. Download the available setup of the DirectX 12 from the given source below.
  • Then wait to complete the downloading process in few working moments.
  • Now, you have downloaded the file DirectX12 on your Windows.
  • Use the setup to install it on your system.
  • You are done. Restart the system immediately now to fix the problems.
Now don't wait for more to start installing the programs. You have completed the requirements to get start the work. Your software is waiting for giving the response. Just click on the available source and begin your download quickly.

Download (DX11 Here)

JazzX JS2 Flashing Solution With CM2 Dongle

JazzX JS2JazzX JS2 Flashing Solution With CM2 Dongle

JazzX JS2 Flash File / Factory Firmware Read Done With Great ToOl CM2...


Here Is File Info...

SP7731CEA_JS2_6.0_JazzX_JS2_MP_18_07_JazzX_JS2

Here is Read Info...
Code:
Chinese Miracle II  [SPD module] v 1.24

Operation : Read FullFlash [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable


 ====  Wait for phone...

Phone found! [ 57 ]
Open Port Failed!

Reconnect Power/Cable!


Operation : Read FullFlash [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 57 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ... 

Phone found! [ 57 ]
Port Opened
CM2 Dongle
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ... 

Phone found! [ 57 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : JS2
Model Brand : JazzX
Model Device: JS2
AndrVersion : 6.0
BaseBand CPU: SP7731CEA
Project Ver : JazzX JS2_MP_18_07
Model Ext   : JazzX JS2

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ... 

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.23.4_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2726 MiB
Saved to : C:\Users\khizar\Desktop\SP7731CEA_JS2_6.0_JazzX_JS2_MP_18_07_JazzX_JS2\
Done!

Elapsed: 00:16:33

Reconnect Power/Cable!

GIONEE P2S Flashing Solution With CM2 Dongle

GIONEE P2SGIONEE P2S Flashing Solution With CM2 Dongle

Brand : GIONEE
ProdName : GIONEE
ProdModel : P2S
Device : GIONEE
AndroidVer: 4.2.2
MTKxCPU : MT6572
MTKxPRJ : ALPS.JB3.MP.V1


write flash done

Operation : Flash [ v1.58 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 8 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004E35585A4D42018BBCB43B32EB
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMZX5
[eMMC] : FLASH_CID : 1501004E35585A4D42018BBCB43B32EB
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 0xB662A14EC259E402C31662D6CAA56BA0
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6572 , Project : gionee72_wet_jb3 , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled
Setting : HW verify : Enabled

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Skip checking by User request!

BL : BatteryLevel : 3798 mV
CM2 Dongle
BL : BatteryLevel Ok

Backup enabled!
Backup saved : Backup\Flash\1501004E35585A4D42018BBCB43B32EB\

BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000000880000-0x0000000000100000
Erase : 0x0000000002580000-0x0000000099AC0000
Flash Pre-Erase Done, time used : 00:00:01

SecCfg Passed , 1799
BMT remark not need. Will skip

Preloader Download skipped by user request! 
PartCount : 0015
Update PMT by user request
Repartition Done!
Use FLN Mode

Processing : Flash Write
Flash now : MBR
Image Flash Ok
Flash now : EBR1
Image Flash Ok
Flash now : UBOOT
Image Flash Ok
Flash now : BOOTIMG
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : SEC_RO
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : EBR2
Image Flash Ok
Flash now : SPDATA
Image Flash Ok
Flash now : ANDROID
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USRDATA
Image Flash Ok
Flash now : FAT
Image Flash Ok
Flash Write Done, time used : 00:05:01

Processing : Verify
Verify Passed : MBR
Verify Passed : EBR1
Verify Passed : UBOOT
Verify Passed : BOOTIMG
Verify Passed : RECOVERY
Verify Passed : SEC_RO
Verify Passed : LOGO
Verify Passed : EBR2
Verify Passed : SPDATA
Verify Passed : ANDROID
Verify Passed : CACHE
Verify Passed : USRDATA
Verify Passed : FAT
Data Verify Done, time used : 00:00:04

Update Mirror PMT
Update Done!

Update RomInfo done

Done!
Elapsed: 00:05:22
Reconnect Power/Cable!

Micromax A102 Flashing Solution With CM2 Dongle

Micromax A102 Flashing Solution With CM2 Dongle

Brand : Micromax
ProdName : A102
ProdModel : Micromax A102
Device : A102
AndroidVer: 4.4.2
MTKxCPU : MT6572
MTKxPRJ : ZAW1800G_060A_V8_2_5

write flash done

Operation : Flash [ v1.58 ]

Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 8 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004B3758564D42010B6AD04C7135
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMVX7
[eMMC] : FLASH_CID : 1501004B3758564D42010B6AD04C7135
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0xB662A14EED50EDEB37D5FAB819D4554A
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6572 , Project : huaqin72_cwet_i_kk , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled
Setting : HW verify : Enabled

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Skip checking by User request!

BL : BatteryLevel : 3957 mV
BL : BatteryLevel Ok
CM2 Dongle

Backup enabled!
Backup saved : Backup\Flash\1501004B3758564D42010B6AD04C7135\

BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000000C00000-0x0000000000100000
Erase : 0x0000000002900000-0x00000001CEA80000
Flash Pre-Erase Done, time used : 00:00:04

SecCfg Passed , 1799
BMT remark not need. Will skip

Preloader Download skipped by user request! 
PartCount : 0013
Update PMT by user request
Repartition Done!
Use FLN Mode

Processing : Flash Write
Flash now : MBR
Image Flash Ok
Flash now : EBR1
Image Flash Ok
Flash now : UBOOT
Image Flash Ok
Flash now : BOOTIMG
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : SEC_RO
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : ANDROID
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USRDATA
Image Flash Ok
Flash now : FAT
Image Flash Ok
Flash Write Done, time used : 00:03:18

Processing : Verify
Verify Passed : MBR
Verify Passed : EBR1
Verify Passed : UBOOT
Verify Passed : BOOTIMG
Verify Passed : RECOVERY
Verify Passed : SEC_RO
Verify Passed : LOGO
Verify Passed : ANDROID
Verify Passed : CACHE
Verify Passed : USRDATA
Verify Passed : FAT
Data Verify Done, time used : 00:00:39

Update Mirror PMT
Update Done!

Update RomInfo done

Done!
Elapsed: 00:04:22
Reconnect Power/Cable!

Intax Aqua 4.5E Flashing Solution With CM2 Dongle

Intax Aqua 4.5EIntax Aqua 4.5E Flashing Solution With CM2 Dongle

Intax Aqua 4.5E Flash file / Factory file Read Done With Great ToOl CM2...


Here Is File Info...

MT6571__Intex__Intex_Aqua_4.5E__IntexAqua4.5E__4.4 .2__ALPS.KK1.MP7.V1

Here is Read Info...
Code:
Operation : Read Flash [ v1.58 ]


1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 4 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6571
BB_CPU_NME : [MediaTek] MT6571_S00
BB_CPU_EXT : 0xCA00 , 0x8D00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x8B
NAND Flash : NOT INSTALLED
eMMC Flash : 1101003030344745300199136E722239
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x11 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 0EG40
[eMMC] : FLASH_CID : 1101003030344745300199136E722239
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID    : 0x3D19A97602C9866E34E1BD8AEDA86A31
INT RAM    : 0x00020000
CM2 Dongle
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 

Brand     : Intex
ProdName  : IntexAqua4.5E
ProdModel : Intex Aqua 4.5E
Device    : IntexAqua4.5E
AndroidVer: 4.4.2
MTKxCPU   : MT6571
MTKxPRJ   : ALPS.KK1.MP7.V1

[Read Ok] : preloader_vsun71_e_kk.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6571 / V1.1.1 / vsun71_e_kk / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 681 MiB
Scatter saved to : C:\Users\khizar\Desktop\MT6571__Intex__Intex_Aqua_4.5E__IntexAqua4.5E__4.4.2__ALPS.KK1.MP7.V1\

All done!

Done!
Elapsed: 00:04:54

SUGAR C6 Flashing Solution With CM2 Dongle

SUGAR C6 Flashing Solution With CM2 Dongle

SUGAR C6 Operation : Identify [ v1.09 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 18558F9F
ID_BLOCK_I : 007050E1
ID_BLOCK_L : 24DCB640EF7B60635C31C3CC0B56DEEE
ID_BLOCK_L : 0C47C96055FC6EE71AD5BE777DB0AEAD
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ] 
ExtInfo : 0x00004000/00004000/00001000/00001000
Boot Ok!


Brand     : SUGAR
ProdName  : L8200
ProdModel : SUGAR C6
Device    : L8200
AndroidVer: 5.1.1
Manufact. : SUGAR
QLMxCPU   : MSM8916

Done!
Elapsed: 00:00:06

Reconnect Power/Cable!
Code:
Operation : Read Flash [ v1.09 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
CM2 Dongle
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 18558F9F
ID_BLOCK_I : 007050E1
ID_BLOCK_L : 24DCB640EF7B60635C31C3CC0B56DEEE
ID_BLOCK_L : 0C47C96055FC6EE71AD5BE777DB0AEAD
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ] 
ExtInfo : 0x00004000/00004000/00001000/00001000
Boot Ok!


Brand     : SUGAR
ProdName  : L8200
ProdModel : SUGAR C6
Device    : L8200
AndroidVer: 5.1.1
Manufact. : SUGAR
QLMxCPU   : MSM8916

DevInfo : MSM8916__SUGAR__SUGAR__ANDR_v5.1.1__SUGAR_C6__L8200__L8200

Reading Flash Content ... 
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : splash.img
[Read Ok] : sbl1.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : hyp.mbn
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : persist.img
[Read Ok] : misc.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8916 / eMMC
Firmware Size : 2276 MiB

Done!
Elapsed: 00:04:15

Reconnect Power/Cable!
Code:
MSM8916__SUGAR__SUGAR__ANDR_v5.1.1__SUGAR_C6__L8200__L8200

Mrt ver 2.33 The New Update Released Setup Download

Mrt ver 2.33 The New Update Released 

The New update version 2.33 is BUGS FIXED in Previous Version ( Ver 2.32 )
Added xiaomi miui9 disable apk function
if you remove account after connect internet relock
use use mrt remove account then disable apk
The new update added Tecno encryption boot support
in the mrt software mtk tools tick Tecno only,then do it
Supported Models
I3 I3 Pro I5 I5 Pro I7 IN3 IN5
adjust huawei unlock tool,more best for support huawei android 8.0 system
Note : CopyPaste the new exe in MRT Ver 2.32 Folder
4Shared

MEGA Upload

MediaFire





Innjoo ONE 3G HD Flashing Solution With CM2 Dongle

Innjoo ONE 3G HD Flashing Solution With CM2 Dongle

Here is File Info...

MT6592__InnJoo__ONE_3G_HD__ONE_3G_HD__4.4.2__ALPS. KK1.MP1.V2.10

Here is Read Info...

Code:
Chinese Miracle II  [MTK module] v 1.58

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey


Wait for phone...
Phone found! [ 13 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6592
BB_CPU_NME : [MediaTek] MT6592_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x8A
NAND Flash : NOT INSTALLED
eMMC Flash : 150100523832314D42004581E07A42DD
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM128
[eMMC] : FLASH_CID : 150100523832314D42004581E07A42DD
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID    : 0x3D19A9764EC1E392333C790B291900BA
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
CM2 Dongle
Boot Ok!

Reading Flash Content now ... 

Brand     : InnJoo
ProdName  : ONE_3G_HD
ProdModel : ONE 3G HD
Device    : ONE_3G_HD
AndroidVer: 4.4.2
MTKxCPU   : MT6592
MTKxPRJ   : ALPS.KK1.MP1.V2.10

[Read Ok] : preloader_d201_92.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6592 / V1.1.2 / d201_92 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1603 MiB
Scatter saved to : C:\Users\khizar\Desktop\MT6592__InnJoo__ONE_3G_HD__ONE_3G_HD__4.4.2__ALPS.KK1.MP1.V2.10\

All done!

Done!
Elapsed: 00:07:31
Reconnect Power/Cable!

GcPro Total update count 63 release date Setup Download

GcPro Total update count 63 release date 

GCPROGSMTOOL V1.0.0.0055 released.
What's New:
Added:
Older firmware without root unlock via credits.
G360T G360T1G530T G530T1
Samsung SHANNON cert read support over DIAG
305 308 310 315 333335 etc
Note: Process is exactly easy dial *#0808# select last option for diag port. select port and make exynos unlock. need older then RA firmware.
beta

Download

Samsung SHANNON code read support over DIAG.
308 310 315 333335 etc
Note: Process is exactly easy dial *#0808# select last option for diag port. select port and make exynos unlock. need older then RA firmware.
beta
Samsung QCOM code read support for model
G935A J320 J327 J727 J510F T337A N950 etc
Note: use option READ_CODE_QCOM connect in normal mode and make sure adb is on.. do not need root.. for unsupported model please contact us.
Note2: this process will make ASK file send to reseller for code return time instant to few minutes.
beta
Improvements:
RLOCK ADB.
Frp ufs uart detection.
Comport sub system to support maxim 9999 ports.
Comport scan.
adb scan show real adb device only.
Samsung flasher,reactivation remove,frp remove,eelock remove etc which stuck application if new bootloader.
GCPROUPDTOOL V1.0.0.24 Released.
Improved
Scard internal issue with self locking..
Strongly Recommend to use latest version. all old version will stop working soon.
NO PACK.
NO EVERY YEAR FEE.. ALL GCPro updates are free.
NO ACTIVATION..
NO BUG LIKE OTHERS..
AGAIN REMEMBER ONLY GCPRO YOU WILL ALWAYS ON TOP
Do you feel it ?
Do you feel it ?
Feel The Difference With GCPro.
Grab it while its HOT.
Big thanks to all bug hunters who helped to improve GCPro software.
Check credits reseller at *** GcPro APP Unlock Credits Resellers List *** or buy directly from GCPROKEY
For indian users can buy credits or ASK TO RPL or ASK TO CODE via www.gsmchevli.com
Download Links:
link1= https://mega.nz/#F!1pxHgTBA!P7owR-MlJxD-r0_N6o0xWQ
link2= https://drive.google.com/folderview?...FE&usp=sharing
link3= http://www.4shared.com/folder/3Ob62NhG/GCPROTEAM.html
link4= https://www.dropbox.com/sh/mt5b2n53b...groARcwba?dl=0
link5= https://www.mediafire.com/folder/kzd5v0z4fecn7/GCPROKEY
link6= https://www.androidfilehost.com/?w=files&flid=120669

Lava iris 810 Flashing Solution With CM2 Dongle

Lava iris 810 Flashing Solution With CM2 Dongle

Lava iris 810 Flash file / Factory file Read done With Great ToOl CM2...


Here Is File Info...

MT6580__Lava__iris_810__lava6580_sp46__5.1__ALPS.L 1.MP6.V2_LAVA6580.WEG.L_P58

Here is Read Info...
Code:
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey


Wait for phone...
Phone found! [ 13 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A483847316505072BF4CC1933E3
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e1G8
[eMMC] : FLASH_CID : 90014A483847316505072BF4CC1933E3
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0x3D19A9763A9E39F05A1265ECCF25FB8F
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
CM2 Dongle

Reading Flash Content now ... 

xGPT : Normalize settings Ok!

Brand     : Lava
ProdName  : iris 810
ProdModel : iris 810
Device    : lava6580_sp46
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_LAVA6580.WEG.L_P58

[Read Ok] : preloader_lava6580_sp46.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / lava6580_sp46 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2144 MiB
Scatter saved to : C:\Users\khizar\Desktop\MT6580__Lava__iris_810__lava6580_sp46__5.1__ALPS.L1.MP6.V2_LAVA6580.WEG.L_P58\

All done!

Done!
Elapsed: 00:09:28

OPPO A37f Flashing Solution With CM2 Dongle

OPPO A37f Flashing Solution With CM2 Dongle

OPPO A37f
Here is File Info...

MSM8916__OPPO__OPPO__ANDR_v5.1.1__A37f__A37f

Here is Read Info...
Code:
Operation : Read Flash [ v1.09 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 2054E83E
ID_BLOCK_I : 007050E1
ID_BLOCK_L : 4BBDD72F8E14010CFB50A0AD6A314189
ID_BLOCK_L : 0F46C86354FF6FE419D4B9767CB3ADAE
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB400000 [ eMMC 16 GiB ] 
ExtInfo : 0x00004000/00004000/00001000/00001000
Boot Ok!



Brand     : OPPO
ProdName  : A37f
ProdModel : A37f
AndroidVer: 5.1.1
Manufact. : OPPO
QLMxCPU   : MSM8916

DevInfo : MSM8916__OPPO__OPPO__ANDR_v5.1.1__A37f__A37f

Reading Flash Content ... 
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sec.dat
[Read Ok] : sbl1.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : hyp.mbn
CM2 Dongle
[Read Ok] : pnvbak.img
[Read Ok] : lsplash.img
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : persist.img
[Read Ok] : misc.img
[Read Ok] : driver.iso
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8916 / eMMC
Firmware Size : 3093 MiB

Done!
Elapsed: 00:05:23

Reconnect Power/Cable!

INEW L4 Flashing Solution With CM2 Dongle

INEW L4 Flashing Solution With CM2 Dongle

INEW L4 Flash File / Factory File Read Done With Great Tool CM2...
INEW L4


Here File Info...

MT6735__INEW__L4__L4__5.1__ALPS.L1.MP3.V1_BIRD6735 M.35GU.A.L


Here is Read Info...
Code:
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 12 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 520001154D313238BEBF004203BAEBCA
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM128
[eMMC] : FLASH_CID : 150100523832314D4200BFBECAEB7203
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID    : 0x3D19A97649E8D4555637A2FA575CF17E
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 

xGPT : Normalize settings Ok!

Brand     : INEW
ProdName  : L4
CM2 Dongle
ProdModel : L4
Device    : L4
AndroidVer: 5.1
MTKxCPU   : MT6735
MTKxPRJ   : ALPS.L1.MP3.V1_BIRD6735M.35GU.A.L

[Read Ok] : preloader_bird6735m_35gu_a_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6735M / V1.1.2 / bird6735m_35gu_a_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1462 MiB
Scatter saved to : C:\Users\khizar\Desktop\MT6735__INEW__L4__L4__5.1__ALPS.L1.MP3.V1_BIRD6735M.35GU.A.L\

All done!

Done!
Elapsed: 00:04:49
Reconnect Power/Cable!