Q Mobile Noir A110 Flash and Scatter Flash File

Q Mobile Noir A110 dead , Pattern lock , hang on logo Q Mobile or Noir. And yet writing userdata the result same.

Solution: 

Download original scatter flash file from mssolutions.com and flash it with sp flash tool version 5.14 other versions not support this mediatek chip mt6572. When it done put out battery and then insert and power on mobile you have done and your problem is solved. 

Q Mobile L1 write flash done

Q Mobile L1 SPD6531 hang problem and security code unlock full flash done on GSM Aladdin tool.

>>> GSM Crack Hunter   ...
>>> Scan pinouts...
>>> //GSM Hunter\\  USB Port...
    Detecting COM Port COM64
>>> Gsm Hunter Mobile,Wait..
    Mobile Connection Success.
    Project ID: SPRD3
>>> Downloading First Boot...
    CPU Name: 6531A
    Flash ID: 00EF004000160000
    Flash Name: W25Q32BV
    Flash Size: 0x400000->4.0M
>>> Writing Flash,Wait...
    Write Done.

Volcano Flash Cable/Jack solution

  

Volcano Tool has Two Jacks which are used in flashing , RJ45 and  Universal Jack. We get RX TX , VCC GND and USB pinouts form Volcano. We can use USB pinouts direct from PC's usb port and RX TX from RJ45. Problem create when universal jack is damaged , broken or not working properly. In this case we can not get or found VCC and GND voltage points. 

Solution:

+,- or vcc and gnd points are marked in figure given bellow. Make two pins or hard wire insert them into points with different colors and relax

Nokia Asha 301 Flash done without error

In my own experience Nokia Asha 301 Flash failed with different errors and problems.
Advance Turbo Flasher Cannot start winusb handler 0x00.
Infinity Best connect but hang and not responding.
Ufs3 the same error not responding.
If check the device manager Asha 301 Usb drivers not installed.

But the first time Asha 301 , Asha 305 and same other Infineon cell phones successfully Security code , Full Flash and Software update done. In our work we use only 3 Flash Files MCU PPM CNT, but in some phone some features and operations not work properly. In given method whole flash package is doing flash.

 Procedure is simple just download Nokia Software Recovery Tool latest version. Internet connection is required.

Install and open Recovery Tool and connect your phone with USB cable.

It will select phone and read information from server.

After this Tool check Mobile Flash Files Package.

 

Tool ask to install .

 

Tick license and continue ......

 

 After download complete it will install files and then restart it automatically .

Latest firmware is installed  in your phone .

Q Mobile X2i 3G Hard Reset Done

Q Mobile X2i 3G Pattern , Pin code , Hang done with hard reset.
Other SPD mobiles problem is lost IMEI No. But if you format it it's IMEI is still remain and
mobile is reset. The Tool I used for This is GSM Aladdin. Format it on Aladdin and Feel Free .

Q Mobile W8 SPD7715 NAND Hard Reset Done

Q Mobile W8 SPD7715 nand Pattern , Pin code , Hang done with hard reset.
Other SPD mobiles problem is lost IMEI No. But if you format it it's IMEI is still remain and
mobile is reset. The Tool I for This is GSM Aladdin. Format it on Aladdin and Feel Free .